Car Inner Tie Rod Boot Kit,Cuttable Rack and Pinion Boot with Clamps & Ties to Protect Steering Components from Dust,Silicone Car Accessories Steering Rack Boots

Multiple Caliber: Tie rod end boot can be cut for good fit, containing 0.39", 0.78", 1.1", 1.37", 1.25", 1.49", 1.65", 1.77" several different ID, but it should be noted that please measure the size before use, the length will be shorter accordingly after cutting

Good Protection: Tie rod boots protect your steering system components, made of flexible silicone material, tie rod boots can act as a solid barrier, so that dust/water, etc. can not come into direct contact with the steering components, avoiding wear and tear on the steering components

Size Information: Tie rod boots total size is 8.85*2.42*2.42 inch (total length 8.85 inch), among them, the large port has 1.25 inch ID, 1.34 inch OD, the small port has 0.39 inch ID, 0.42 inch OD, the total length of the cable tie is 7.8 inch. Please be aware of the above dimensions before buying

Abundant Kit: In the tie rod boot kit for you to prepare the steering rack boot*2, clamp*4 (large*2, small*2), tie*6, you can install and replace the work after receiving, the attached clamp and tie can help you fix the steering rack boot

Steps to Use: 1. Find the original steering rack boot position, take off the old aging steering rack boot. 2. Clean the surface of the mounting position, slide the new steering rack boot to the original position and adjust the position slightly. 3. Finally, use the clamps or tie wraps to fix it