DPTOOL Camshaft Phaser Timing Chain Tool Camshaft Holding Tool Crankshaft Pulley Wrench Compatible with VW Jeep Chrysler Dodge 3.6L Pentastar Engine Replace 10200A 10202 10369 10198A 2025200090

A Complete Set: This 3.6l Pentastar timing tool kit includes 3 x timing chain holders, 2 x phaser locks, 1 x camshaft tensioner locking pin, 2 x camshaft holding tool and 1 x crankshaft pulley wrench, and it comes with a portable case for easy carrying and storage

Wide Application: This complete timing tool set is compatible with a wide range of 2011 to 2019 VW Chrysler Jeep Dodge Grand Cherokee Wrangler V6 3.6L pentastar engine, and compatible with Chrysler /Grand Cherokee/Durango /Ram 1500/Wrangler JL/Gladiator 3.6L WD WK JL DT engine

Function: The camshaft phaser timing tool is used to hold the Camshaft/Phaser`s while performing the loosening and tightening of the Oil Control Valves, and used to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures; This camshaft holding tool is used to hold the camshaft in a right position when adjust timing or replace timing chain; This crankshaft vibration harmonic damper holder tool is used to hold the crankshaft pulley while they pulley retaining bolt is loosened/tightened

OEM Equivalent Part Number: 10369A, 10200A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3, 10198A, 10369, 2025200090

Tips: 10200-1 & 10200-3 are used on Drivers Side, 10200-2 is used on Passenger's Side. 2012 and newer models also require 10369A. Some 2011 models may also require 10369A, depending on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A