Nilight Motorcycle USB Type C Port 12V Voltmeter Independent On Off Switch SAE Inline 10A Fuse Waterproof 6.8A QC3.0 Fast Phone Tablet for 7/8inch Handlebar

Efficient Charge: USB & Type-C port support QC 3.0 fast charging technology. Allow you to charge two devices simultaneously at full speed with 5V 3.4A / 9V 2.5A / 12V 2A. If your device supports QC 3.0 fast charging or SCP and FCP Charging Technology. Then this device would be the best choice rather than the traditional 2.4A/3.1A Motorcycle Phone Charger. It works for all USB-powered devices. makes the charger 40% faster than conventional chargers.

LED Voltmeter: It has a voltmeter on top, clearly shows the current readings of working volts, easily notice the voltage condition of the batteries. You can also check the item's on-off status by observe the LED light status. When you turn off the switch, the voltage will not display and vice versa.

Independent On Off Switch: Some people would worry about the battery being drained off with the item powered on for a long while. This USB has an on off switch and we would recommend turning it off when you're not using it so that the battery will not drain off. This item is equipped with a waterproof rubber cap, it can keep the USB charger and switch from rain and dust by closing the caps when you are not using it. Great for all weather conditions.

Easy Installation and Connection: 2 Power Method: A: The product is designed with an SAE interface, which can be connected directly to the battery with the original SAE interface. B. It is also equipped with a SAE/O Ring harness(built in a 10A inline fuse), which can be directly connected to the battery and is more convenient to install. 2 Installation options. A: Install to any 7/8inch handlebar with the O shape mounting bracket. B: Mount with pad bracket and screws, it can be mounted to almost

Perfect Wire Length: Product length: 42.5 inch (from the pigtail of the item to the end of SAE receptacle), SAE to O ring wiring harness: 4.53 inch. It's long enough to connect to the battery. The Motorcycle SAE to USB phone Charger's input is 12 volt, and the output is 5V 3.4A / 9V 2.5A / 12V 2A for Both USB Port. Smart IC Adjust the output Electricity for your Device Automatically.

Package Includes：Motocycle USB Adapter with USB and Type C Charging Port, SAE Extension Cable, Handlebar Mounting Bracket, Screw Mounting Bracket, Non-slip Washer, Large Screw, Small Screw, Handlebar Fixing Screw.