Powerbuilt Ball and U Joint Service Set, 23 Piece Tool Kit, Remove and Install Ball Joints, Receiving Tube, Adapters, Sockets - 648617

Look no further for a perfect tool set to install and remove vehicle ball and U joints. The Powerbuilt Ball Joint & U Joint Service Set includes 23 tools perfect for working with pressed-in type ball joints found on most vehicles. It saves you work by letting you change ball joints without removing control arm from the vehicle. This set includes receiving and installing tubes, cups, and adapters, and all the accessories you'll need to get the job done. Carry case includes usage photos and instructions. Meets or exceeds ANSI standards.

This set includes:

• Plug: OD 7/8"
• Receiving Tube: OD 2-1/4" ID 2", 2"
• Installing Tube: OD 2" ID 1-3/4", 3"
• Receiving Tube: OD 2-1/2" ID: 2-1/4", 1-1/2"
• Receiving Cup: OD 2-1/4" ID 1-7/8", 7/16"
• Receiving Tube: OD 2 1/2", 2-1/4", 3/4"
• Receiving Tube: OD 2-7/16" ID 2-3/16", 3-3/16"
• Remover/installer: OD 1-7/16" ID 3/4", 1"
• Installing Tube: OD 2" ID 1-3/4", 2-5/16"
• Receiving Cup: OD 2-1/8 ID 1-3/4", 1/2"
• Receiving Tube: OD 2-1/2" ID 2-1/4", 2-3/4"
• Receiving Tube: OD 3" ID 2-3/4", 2-1/4"
• Receiving Tube: OD 2-3/4", ID 2-7/16", 2-1/4"
• Receiving Tube: OD 2-7/8" ID 2-5/8", 2-7/8"
• Screw
• C-frame
• Receiving Tube: 1-3/4" X 2"
• Receiving Tube: 2-1/4" X 2-1/2"
• Receiving Tube: 2-3/4" X 3"
• Removal Adapter
• Install Adapter 3/4"dr. X 1-59/64"
• Install Adapter 3/4"dr. X 2-9/64"
• Blow Molded Case

Removes and installs pressed-in type ball joints found on most vehicles

Changes ball joint without removing control arm from the vehicle

Tools can also be used to remove and install U Joints

Carry case includes usage photos and instructions

Meets or exceeds ANSI standards

From the Manufacturer

Each kit includes step-by-step usage instructions and photos showing the tool in use. Instruction sheets are laminated to resist staining and are permanently fastened to the case. All instructions are developed by a professional repair manual writer.

Kit 46 tools are for removing and installing most sizes of press-fit ball joints. Allows change out of ball joint without removal of the control arm. These tools can also be used to remove and replace U-joints.

The set includes:

• 1 PC - PLUG: O.D. 7/8"
• 1 PC - RECEIVING TUBE: OD: 2-1/4", ID:2", 2"(L)
• 1 PC - INSTALLING TUBE: OD: 2", ID: 1-3/4", 3"(L)
• 1 PC - RECEIVING TUBE: OD: 2-1/2", ID: 2-1/4", 1-1/2" (L)
• 1 PC - RECEIVING CUP: OD:2 -1/4", ID: 1-7/8", 7/16" (L)
• 1 PC - RECEIVING TUBE: OD:2 1/2", OD: 2-1/4", 3/4" (L)
• 1 PC - RECEIVING TUBE: OD:2-7/16", I.D:2-3/16", 3-3/16"(L)
• 1 PC - REMOVER/INSTALLER: OD:1-7/16", I.D:3/4", 1" (L)
• 1 PC - INSTALLING TUBE: OD: 2", ID: 1-3/4", 2-5/16" (L)
• 1 PC - RECEIVING CUP: OD: 2-1/8: ID: 1-3/4", 1/2" (L)
• 1 PC - RECEIVING TUBE: OD: 2-1/2", ID: 2-1/4", 2-3/4" (L)
• 1 PC - RECEIVING TUBE: O.D.: 3", ID: 2-3/4", 2-1/4" (L)
• 1 PC - RECEIVING TUBE: O.D.: 2-3/4", ID: 2-7/16", 2-1/4"(L)
• 1 PC - RECEIVING TUBE: OD: 2-7/8", ID: 2-5/8", 2-7/8" (L)
• 1 PC - SCREW
• 1 PC - C-FRAME
• 1 PC - RECEIVING TUBE: 1-3/4" X 2"
• 1 PC - RECEIVING TUBE: 2-1/4" X 2-1/2"
• 1 PC - RECEIVING TUBE: 2-3/4" X 3"
• 1 PC - REMOVAL ADAPTER
• 1 PC - INSTALL ADAPTER
• 1 PC - 3/4"DR. X 1-59/64". 2"(L)
• 1 PC - 3/4"DR. X 2-9/64". 2"(L)
• 1 PC - BLOW MOLDED CASE